X-Front Harness Bra in Reflective White with Chain Fringe Skirt

This two-piece harness set pairs an X-front strap bra with a beaded chain fringe skirt, both built from reflective white webbing that catches camera flash and stage lighting on contact. The crop-length bra crosses at the sternum over a center O-ring, then splits into two shoulder straps set with metal grommets, while the high-waist belt below carries the same trim and sheds rows of beaded chain instead of solid fabric. Rivet-style buckles run down both straps and the waistband, so each piece adjusts rather than staying fixed.

X-Front Harness Build

The bra top uses two straps that cross into an X shape over the chest before meeting a center O-ring at the underbust, then split again into shoulder straps finished with silver-toned grommets. The waist belt sits as a separate piece, closing with its own tri-glide buckle and carrying matching grommet trim so the two parts read as one set rather than a mismatched pairing. The reflective thread is woven into the webbing rather than printed on top, so the finish does not flake or peel with normal wear.

• Reflective white webbing straps, approximately 2.5cm wide
• Center O-ring connector at the underbust with X-front crossover
• Silver-toned grommets and tri-glide buckle hardware on both pieces
• Beaded chain fringe skirt hangs from its own waist belt
• Two-piece harness set: crop bra top plus fringe waist skirt

How to Style the Set

Worn over sheer tights or a fitted bodysuit, the fringe skirt reads as a going-out layer rather than a stand-alone garment, and the reflective straps pick up flash photography or stage lighting the way road safety gear does. Two outfit directions work well with this reflective harness bra: layer it over a black bodysuit with the fringe skirt sitting at the hip bone for a festival or rave outfit, or wear the bra on its own over a fitted top with high-waisted trousers and skip the fringe skirt for a going-out layer. Dark clothing underneath makes the white straps stand out most, since the reflective effect reads strongest against contrast.

Sizing and Fit Guide

This harness set comes in six labeled sizes: XS/S, S/M, L/XL, 2XL/3XL, 4XL/5XL, and 6XL/7XL, running from the smallest to the largest label in that order. XS/S and S/M suit slimmer chest and waist frames, while 2XL/3XL through 6XL/7XL extend the strap and belt length for fuller builds. The buckles on both the bra and waist belt adjust within each labeled size to fine-tune the fit, though the set is not built for underbust or waist measurements far outside its labeled range.

• Six sizes offered: XS/S, S/M, L/XL, 2XL/3XL, 4XL/5XL, 6XL/7XL
• Adjustable buckles on both the bra straps and waist belt
• Best fit is a snug underbust and waist measurement, not loose layering
• Fringe skirt length stays fixed and does not lengthen with size

Material and Care Details

Both pieces are built from faux leather webbing finished in reflective white, with the fringe skirt strands made of small beaded chain rather than fabric. The hardware across the set is metal grommets and a tri-glide buckle. Because the reflective coating is heat sensitive, hand washing keeps the strap finish intact longer than a machine cycle, and the chain fringe should sit in a mesh bag if it goes through any wash at all.

• Faux leather webbing straps with woven-in reflective white thread
• Beaded chain fringe skirt strands, not woven fabric
• Metal grommet and tri-glide buckle hardware throughout
• Hand wash cold and air dry to protect the reflective finish