White Reflective Harness with Cut-Out Cups and Y-Strap Waist

This harness is a two-piece reflective strap set: a cut-out cup bra top with an oval opening at each side of the underbust, paired with a separate Y-strap waist band that buckles at the hip and runs down toward the upper thigh. The straps carry a reflective white finish over faux leather, so the piece reads bright white in flash photography and dim under normal light, a contrast built into the strap coating rather than a lighting trick.

Strap Layout & Hardware

Two shoulder straps meet a wide underbust band shaped into twin oval cut-outs with a center connector ring, giving the top a cage-style silhouette rather than a solid cup. Matte metal buckles sit at each shoulder and at the side seam, letting the band size be fine-tuned without changing the labeled size. The waist section attaches at its own hip buckle, so the top and the Y-strap piece can be worn together as shown or removed independently once unbuckled.

• Two adjustable shoulder straps with metal buckles
• Underbust band with two oval cut-outs and a center ring
• Side-seam buckles for chest band adjustment
• Separate hip buckle joining the waist piece to the top
• Single center connector ring between the two cut-out ovals

How to Style

Worn over a black bralette or bodysuit, the reflective straps sit as a standalone cage layer for festival and rave outfits; worn directly against skin under a sheer or open jacket, the same straps become the main visual focus for photo sets and after-dark styling. Both combinations rely on dark backgrounds or contrasting fabric to make the white strapping stand out, since the reflective coating reads brightest against black. A third option pairs the top alone with high-waisted trousers for a more toned-down layered look, keeping the Y-strap waist piece off for daytime wear.

• Over a black bodysuit with the Y-strap waist piece left visible at the hip
• Directly on skin under an open jacket for a going-out photo look
• Top only, buckled over high-waisted black trousers for a toned-down layer

Sizing & Fit

The harness is cut to six labeled sizes: XS/S, S/M, L/XL, 2XL/3XL, 4XL/5XL and 6XL/7XL, and every buckle adjusts within its labeled size rather than across sizes. XS/S and S/M fit slimmer chest and hip frames closely, while 2XL/3XL through 6XL/7XL extend the strap length for fuller frames; buyers between two labels should size up for comfortable buckle clearance. Each buckle has several holes, so within a labeled size the shoulder and side straps can be tightened or loosened by a few centimeters to fine-tune the fit.

Fit Notes

The Y-strap waist section sits low on the hip and narrows toward the upper thigh, so it works best with high-rise bottoms or bare-leg styling rather than layered over thick waistbands. Buyers with a longer torso should check the underbust band placement, since the band sits fixed relative to the shoulder strap length within each labeled size.

Material & Care

The straps are faux leather with a reflective white coating and matte black metal buckles; there is no fabric lining, since the design is an open strap harness rather than a covered garment. Wipe the strapping with a damp cloth to clean it and let it air dry fully before storage, since the reflective coating can crack if folded tightly for long periods. Store the harness flat or loosely coiled rather than creased at the buckle points to keep the reflective surface even over repeated wear.

• Faux leather strapping with a reflective white finish
• Matte black metal buckle hardware
• Wipe clean with a damp cloth; avoid machine washing
• Store flat or loosely coiled to protect the reflective coating