Reflective White Body Harness Top with Choker and Cage Bra

This reflective white body harness top pairs an adjustable choker collar with a cage-style bra front built from crisscrossing straps and stacked horizontal bands. The straps carry a reflective white finish that flashes bright white under camera flash or direct light while reading as a soft off-white tone in normal room lighting. Four side buckles with silver-tone sliders let you tighten or loosen the ribcage and bust bands independently.

Cage Bra Construction

The front section is built from narrow straps arranged in a V-shaped cage over the chest, connecting into five stacked horizontal bands that wrap the ribcage below the bust. A single silver-tone O-ring anchors the point where the choker strap meets the cage, and matching O-rings sit at each side seam where the adjustable buckles attach.

• Choker collar strap with a rear buckle closure
• V-shaped cage front made from crisscrossing straps
• Five horizontal ribcage bands stacked below the bust
• Silver-tone O-rings and sliders at the front and side seams
• Four independent adjustment points across ribcage and bust

Styling the Cage Harness

Worn over a black bodysuit or fitted leotard, the reflective straps read as a stand-alone statement layer for a night-out or festival look, close to how it is shown here paired with high-waisted leggings and heeled sandals. For a going-out outfit, layer it over a fitted black long-sleeve top with straight-leg trousers so only the cage front and choker show above the neckline; for a rave or photo-shoot look, wear it directly over a black bralette with wide-leg pants so the horizontal bands catch light against bare skin at the waist.

Ribcage and Choker Fit

The four side buckles expand the ribcage and bust bands across roughly a 68 to 96 cm combined range, which fits most XS to L frames comfortably; a ribcage above 100 cm or a fuller bust may find the cage front sits tight across the bands. The choker collar is a fixed-length strap with a single rear buckle, so it suits average to slender neck circumferences and will not sit comfortably on an unusually short or thick neck.

Faux Leather Care

The straps are a faux leather with a reflective white coating bonded to the strap surface, so the glow effect is a material property rather than a printed pattern. The hardware is silver-tone metal, and the straps are a single unlined layer without fabric backing. Because the reflective coating can crack under high heat, avoid machine washing or ironing directly on the straps.

• Wipe the straps clean with a damp cloth after wear
• Air dry flat away from direct heat sources
• Store flat rather than folded to avoid crease marks on the coating
• Do not iron or tumble dry, as heat degrades the reflective finish