Full Body Cage Harness with White Reflective Straps and Chains

This is a full body cage harness made from wide reflective straps that appear plain white in daylight and glow under flash or low light. The straps cross the chest and ribcage in a structured cage pattern, and thin metal chains hang from each shoulder down to the upper arm. A matching brief with side straps and the same reflective finish completes the two piece set.

Cage bodice construction

The bodice uses a series of horizontal and diagonal straps riveted together with dark metal studs, forming an open cage across the ribs and underbust. A thin collar strap sits at the base of the neck with a small connector ring at the front, and a wider strap wraps the natural waist as the base for the chain drape. The chains are a light silver tone metal and hang loosely rather than sitting flat against the skin, so the amount that shows changes with movement. The chains are fixed in length and are not adjustable, which is worth knowing if you prefer hardware you can tighten or shorten.

• Front collar strap with a single connector ring at the base of the neck
• Cage style bodice built from horizontal and diagonal straps across the chest and ribs
• Two shoulder chains that drape down the upper arm on each side
• Dark metal rivets at every strap junction, spaced roughly 3 to 4 cm apart
• Adjustable waist strap connecting the bodice to the chain drape

Sizing and fit

The harness ships in six size ranges: XS/S, S/M, L/XL, 2XL/3XL, 4XL/5XL and 6XL/7XL. The straps buckle rather than stretch, so fit depends on strap length rather than fabric give. The smaller ranges suit a narrower rib cage and bust, and the larger ranges suit a fuller bust and hips without pulling the cage pattern flat. Buyers between two ranges should size up, since a harness that runs tight will flatten the cage straps against the skin instead of letting them sit open.

• XS/S and S/M fit a narrower frame through the rib cage and bust
• L/XL fits a fuller bust and waist without crowding the cage straps
• 2XL/3XL and 4XL/5XL fit a curvier torso with more room across the ribs
• 6XL/7XL fits the largest frame this style is made for
• Not built for a very petite or very tall torso, since strap placement is fixed and does not shift with height

Styling and occasion

The cage harness works layered over plain lingerie for a photo set, or worn alone for a night out built around bold accessories. Pair it with a black bralette and high waisted briefs underneath for more coverage, or wear the harness and matching brief on their own with fishnet tights and platform boots for a look built around the chains and cage straps. Since the straps sit close to the skin, a smooth base layer underneath keeps the rivets from catching on ribbed or textured fabric. For a photo shoot, the chain drape reads best under side lighting that picks out the metal against the reflective straps.

Material and care

The straps are a reflective coated faux leather over a firm strap backing, finished with dark metal rivets and light silver tone chain hardware. Wipe the straps with a damp cloth rather than machine washing, since water and detergent can dull the reflective coating after repeated washes. Store the harness flat or hanging rather than folded, so the cage straps keep their shape instead of creasing at the rivet points. The reflective coating wears faster with daily use than with occasional wear, so rotate it with other pieces if you want the shine to hold up over time.