Double X-Front Body Harness in Reflective White with Leg Strap

This is a reflective white body harness built from two stacked X-crossings that run from the bust down to the waist, finished with a single adjustable leg strap that extends to one thigh. Nickel-tone rings link each row of straps at the center, and the reflective webbing catches camera flash and direct light the same way retro-reflective safety tape does. It sits over your own bra or bodysuit rather than replacing one, so the cage pattern layers on top of whatever base piece you already own.

Double X-Front Cage

The upper X sits across the bust line while the lower X wraps the midriff, meeting at a center O-ring that also anchors the descending leg strap. Each strap row uses 1.5 cm wide reflective webbing with a matte black backing, so the reflective face shows outward and the black lining sits against skin.

• Two stacked X-crossings running from bust to natural waist
• Adjustable shoulder straps with metal slide buckles on both sides
• Center O-ring connector linking the waist cage to the leg strap
• Nickel-tone hardware at every strap junction, six points total

Club and Photoshoot Styling

Layer it over a plain black bralette and high-waisted briefs for a night-out look, or pair the harness with sheer tights and heels for a photoshoot or blacklight event where the reflective webbing needs a dark backdrop to read clearly. Because the leg strap sits on one thigh only, the piece reads as asymmetric under a fitted mini dress rather than symmetric like a full harness set.

Size Range and Fit

The harness is offered in six labeled sizes, from XS/S up to 6XL/7XL, and each buckle adjusts within its own labeled size rather than across sizes. XS/S and S/M fit narrower rib cages and slimmer thighs, while 2XL/3XL through 6XL/7XL extend the strap length for fuller busts and thighs; the labels run XS/S, S/M, L/XL, 2XL/3XL, 4XL/5XL and 6XL/7XL, and sizing beyond 6XL/7XL is not offered.

Material and Care

The webbing is a reflective-coated faux leather strap, 1.5 cm wide, faced with the reflective print and backed in matte black polyester, joined by nickel-tone metal rings and slide buckles. Spot clean with a damp cloth and mild soap rather than machine washing, since agitation and heat can dull the reflective coating over repeated cycles.

• Reflective-coated faux leather strapping, 1.5 cm wide
• Matte black polyester backing against the skin
• Nickel-tone metal O-rings and slide-adjust buckles
• Hand wipe or spot clean only, air dry away from direct heat