Chest Harness in Black Faux Leather with Reflective Collar Set

This chest harness is a black faux leather body harness with adjustable straps that cross the back and meet at a silver-tone O-ring centered between the shoulder blades. The set includes a matching collar and armband, each cut from the same black strap material and printed with bold white reflective text. Worn over bare skin or a fitted top, the harness adds a hardware-heavy layer to an outfit rather than replacing one.

Hardware and construction

The back plate is where four straps meet at a 3.5 cm silver-tone O-ring, with two smaller D-rings anchoring the front chest bands lower on the torso. Every strap runs through a metal slide buckle, so length adjusts without unclipping the harness first. The rivets and rings sit flush against the black faux leather rather than protruding sharply, which keeps the profile close to the body.

• Center back O-ring, approximately 3.5 cm in diameter, silver-tone finish
• Four slide buckles for independent strap adjustment across shoulders and chest
• Two front D-rings positioned below the collarbone line
• Strap width of roughly 2 cm throughout the harness body

Styling the harness

Worn alone over bare skin, the harness pairs with dark denim or leather trousers for a going-out look built around the hardware. Layered over a plain black tank top, the same harness reads more casual and works under an open jacket on cooler evenings. A leather or faux-leather jacket left open over the harness lets the O-ring show through so the hardware stays the visible focal point of the outfit. The reflective collar and armband can be worn together or separately, so the three-piece set adapts to a plain outfit without extra accessories.

Sizing and fit

The harness comes in five strap-range sizes: XS/S, S/M, L/XL, 2XL/3XL and 4XL/5XL, and each buckle adds roughly 8 to 10 cm of extra adjustment beyond its base setting. XS/S sits closest around a narrow frame, while 4XL/5XL opens up for a broader chest and shoulders. Because every strap buckles independently, the fit adjusts for torso length as well as width, though the harness rides higher on the torso on very tall frames than on average height wearers. Wearers with a chest circumference above roughly 150 cm should size up to 4XL/5XL rather than stretching the 2XL/3XL setting to its limit.

• XS/S: smallest strap setting, closest fit around the chest and back
• S/M and L/XL: mid-range settings for average to broad builds
• 2XL/3XL and 4XL/5XL: widest settings for larger frames

Material and care

The harness, collar and armband are made from black faux leather over a stiffened strap core, with silver-tone metal hardware at every joint. Wipe the straps down with a damp cloth and mild soap, then air dry away from direct heat before storing flat. The reflective print on the collar and armband is heat-set rather than sewn on, so it holds up under normal wear but should not be scrubbed directly during cleaning. Faux leather of this weight holds its shape well but can crack at the fold if stored rolled tightly for long periods, so flat storage matters more than for a fabric harness.